C3.png
DSC Charging Backpack
BP.png

The technology of this product's photo-dynamic energy panel uses the third-generation dye-sensitized photo-dynamic energy battery, which is characterized by lightness, thinness, drop resistance and flexibility. Its power generation conditions are limited to the least products currently on the market. The Lux can output 5V to generate electricity even from outdoor sunlight. It is very suitable for outdoor travel and use in any ambient light source, as long as there is light in the environment, it can generate electricity.

Product Specifications

Solar energy module battery output: 5V/360mA (1.8W)
Energy storage battery storage capacity: 10.96W
Energy storage battery power output: 5V/1A
Energy storage battery specification: 3.7V/2800mAh
Total weight (including battery and hook): 410g
Expanded size: 510mm x 330mm
Folded size: 155mm x 330mm

Product Introduction

Using sunlight to charge energy storage batteries
 

  1. Fully unfold the product where there is light, and the place with the light kinetic energy board faces the light.

  2.  Use the supplied USB cable to connect the USB port on the back of the charging board to the mini USB input port of the energy storage battery.

  3. When the power indicator light on the energy storage battery switch flashes: the solar energy board is charging the energy storage battery.

  4. When the power indicator light at the switch of the energy storage battery is always on: it means the charging is complete.

Solar charging efficiency
 

  1. Under the shade of the jungle (5000~10000 Lux), charging for 20 minutes, the smartphone can talk for 3 minutes. A day's worth of smartphone calls and 1 hour of tablet use.

  2. The time required to fully charge the energy storage battery: sunny - 0.5 days; cloudy - 1 day (open environment)

  3. The performance will vary according to the different specifications of each brand of mobile phone, as well as the light intensity and angle.

  4. 3C products are not suitable for charging 3C products directly with the solar energy board due to the limitation of the specifications of various charging management chips. It is recommended to charge the 3C products through the output of the energy storage battery dedicated to this product.


Energy storage batteries to charge your products
 

  1. Before charging, please disconnect the USB cable from the solar-powered board.

  2. Connect the USB charging cable of your product to the USB 5V output port of the energy storage battery.

  3. Press and hold the power switch of the energy storage battery for 3 seconds, until the power indicator flashes gradually, indicating that the charging starts.

  4. After charging is completed, you need to press and hold the power switch for 3 seconds, and when the power indicator light is always dark, it means that the energy storage battery is turned off to avoid continuous power output and loss.

  5. The energy storage battery can also be charged through the general 5V mains.

Applicable Scenario

Lightweight / can be stored independently / low power generation limit

  1. It is easy to store in quality and has good environmental tolerance. It is very suitable for temporary lighting and communication power supply in disaster relief. It can be used in combination with tents.

  2. The troop squad or battalion equipment is used as the auxiliary power supply for the communication/lighting/computer and other equipment of the temporary command base of the marching field.

  3. Auxiliary power supply for border patrol and fixed-point communication and lighting for nomadic people.

  4. Auxiliary power supply for communications/lighting/computers related to outdoor camping activities.

Preserve and Safety Important Information
  1. Do not place the product near high temperatures or in contact with water

  2. The operating environment should not be lower than -10oC or higher than 65oC

  3. Do not dispose of product parts at will, please discard or recycle according to local regulations.

  4. Please use the supplied energy storage power supply as the solar energy power generation energy storage unit. Using other unapproved accessories may invalidate the product warranty or even cause damage.

  5. Cleaning: wipe with a slightly damp cloth, do not use solvents or other chemicals.

C1.png
C2.png